MTS 252.23G-01 MOOG G761-3262 SERVO VALVE WITH MANIFOLD BLOCK

43586AM7 Manifold | MTS P/N 56-006-301 | 4500 PSI | +/-50mA | Seller Refurbished – Very Good Condition

Condition

Seller Refurbished – Very Good Condition

This MTS hydraulic servo valve with manifold block is offered in seller refurbished, very good condition. Please review all listing photographs for cosmetic appearance, valve markings, manifold surfaces, electrical connector, hydraulic ports, and included components.

The previously supplied photograph shows cosmetic signs of handling or use on the metal assembly. Specific hydraulic bench testing, leak testing, calibration, and operational performance results have not been provided for this listing.

Product Overview

The MTS 252.23G-01 is an industrial electrohydraulic servo valve offered with a 43586AM7 manifold block, as identified in the supplied product description.

The valve is also described as Moog G761-3262. The previously photographed nameplate displays G761-3262B, along with MTS P/N 56-006-301. The exact relationship between these model designations and any manufacturer interchangeability should be confirmed before purchasing.

The MTS valve nameplate specifies 4500 PSI and an electrical signal of +/-50mA. These specifications refer to the identified valve and should not automatically be interpreted as the independently verified rating of every component in the complete manifold assembly.

Electrohydraulic servo valves are used in compatible closed-loop hydraulic control systems to regulate hydraulic flow in response to electrical control signals. Such systems may be used for precision motion, position, force, and hydraulic actuator control.

The included manifold block provides a hydraulic mounting and connection interface. The exact port arrangement, dimensions, internal passages, and pressure compatibility of the supplied 43586AM7 manifold have not been independently verified.

This assembly is intended for compatible industrial hydraulic equipment, material testing systems, precision hydraulic motion control, machinery maintenance, replacement, and MRO applications requiring the exact valve and manifold configuration.

Product Details

• Brand / Valve Nameplate: MTS
• Additional Supplied Brand: Moog
• MTS Model: 252.23G-01
• MTS Part Number: 56-006-301
• Supplied Moog Designation: G761-3262
• Additional Valve Nameplate Marking: G761-3262B
• Manifold Block Identifier: 43586AM7 (seller supplied)
• Product Type: Electrohydraulic Servo Valve with Manifold Block
• Valve Pressure Rating: 4500 PSI (nameplate)
• Valve Electrical Signal: +/-50mA (nameplate)
• Electrical Connection: Circular 4-Pin Male Connector (previous photograph)
• Mounting Configuration: Manifold-Mounted Hydraulic Valve Assembly
• Valve Nameplate Date: November 2010 (11-2010)
• Application: Industrial Hydraulic Servo & Motion Control
• Quantity: 1 Valve and Manifold Assembly
• Condition: Seller Refurbished – Very Good Condition

Applications

• Compatible MTS hydraulic testing equipment
• Industrial electrohydraulic servo control systems
• Hydraulic motion and position control
• Material testing and laboratory hydraulic equipment
• Precision hydraulic actuator systems
• Compatible hydraulic manifold replacement applications
• Industrial hydraulic equipment maintenance and repair
• Maintenance, Repair, and Operations (MRO)

Please verify the exact valve model, manifold configuration, electrical signal, pressure requirements, hydraulic port arrangement, and compatibility with your existing equipment before purchasing.

Included in This Listing

• 1 x MTS 252.23G-01 Electrohydraulic Servo Valve – P/N 56-006-301
• 1 x 43586AM7 Hydraulic Manifold Block (seller supplied identification)

Quantity: 1 combined servo valve and manifold block assembly per purchase.

Additional hydraulic hoses, external cables, controllers, adapters, mounting hardware, and accessories are not included unless specifically stated or shown in the listing photographs.

Important Notes

• Verify the exact MTS 252.23G-01 valve model.
• Confirm the 56-006-301 MTS part number.
• Verify the supplied Moog G761-3262 designation.
• Confirm the photographed G761-3262B marking and any suffix differences.
• Verify the 43586AM7 manifold block identifier.
• Confirm the valve nameplate pressure rating of 4500 PSI.
• Verify the specified +/-50mA electrical signal.
• Check the electrical connector and pin assignments.
• Confirm hydraulic port configuration, mounting dimensions, and sealing requirements.
• Verify the pressure rating and compatibility of the complete manifold assembly.
• Confirm the required hydraulic fluid, cleanliness, and filtration specifications.
• Verify flow capacity, response characteristics, and control system compatibility.
• Review the valve nameplate date 11-2010.
• Inspect the assembly and review all listing photographs before installation.
• Installation should be performed by qualified hydraulic personnel.

Important Model Verification: The supplied product description identifies Moog G761-3262, while the previously photographed valve nameplate displays G761-3262B. These identifiers must not be treated as interchangeable without manufacturer confirmation.

Important Pressure Verification: The 4500 PSI rating is taken from the MTS valve nameplate. The maximum operating pressure of the complete assembly must be established using the ratings of the valve, manifold block, fittings, and connected hydraulic components.

The exact manifold specifications, internal hydraulic passages, port dimensions, rated flow, and complete assembly compatibility have not been independently verified.

This assembly is described as Seller Refurbished – Very Good Condition. Specific hydraulic pressure testing, leakage testing, flow calibration, and operational performance results have not been provided.

High-pressure hydraulic equipment can cause serious injury. Verify system compatibility, pressure limits, hydraulic cleanliness, and safe installation procedures before placing this assembly into service.

Photos are part of the item description.

Local Delivery

Local deliveries available, simply message us before purchasing so we can properly adjust the listing for you.

Please provide your:

• Delivery address
• Preferred delivery time
• Contact information

Shipping

Items are shipped via USPS and UPS upon receiving payment. If another shipping method is required, please contact us.

Expedited Shipping

We offer rush handling.

• UPS 3 Day Select
• UPS 2 Day Air
• UPS 2 Day Air AM
• UPS Next Day
• UPS Next Day AM

Orders must be arranged and paid in full before 3:00 PM CST Monday-Friday.

Return Policy

We offer a 30-Day Money Back Guarantee.

Buyer pays return shipping on buyer-remorse returns. Returns are accepted within 30 days. Items must match the description and are sold as displayed.

For multiple quantity listings, the exact unit shown in the photos may not be the exact unit received.

International Customers

International customers outside the U.S. may be subject to customs or duty fees.

VISIT OUR EBAY STORE

BREAKTHRU SURPLUS — Quality Industrial Surplus

Browse thousands of industrial surplus items, electrical components, automation equipment, machine controls, and MRO replacement parts.

QUALITY INDUSTRIAL SURPLUS | BUY • SELL • SAVE